General Q&A for Installing and Using the Thor Accelerator Router Plugin

First Declaration

I am not the official Leigod, and I am not responsible for the maintenance of the Xiaomi and Asus Leigod plugins. I am simply providing my users with the convenience of using the OpenWrt Leigod plugin, and I have separately extracted the Leigod plugin from cattools for free use. I am not responsible for providing other hardware services.

Please do not initiate private chats with me in the group; I will check the group when I have time to answer relevant questions!

The official supported device chart is indeed misleading; it does not mean that you can install it by simply clicking with the router manufacturer, but rather that SSH access is required for installation. If you do not have SSH access, the above devices do not support your router, and you can purchase official hardware for acceleration.

If you have not purchased a router to use Leigod, it is recommended not to refer to that so-called compatibility chart. The official focus is still on: TP cooperative routers, Leigod routers, and Leigod acceleration boxes.

This tutorial requires some tinkering to use and is not suitable for everyone.

Use the exclusive Leigod accelerator code miaoer to get 50 hours of non-pause experience time, and with the OpenWrt end, you can achieve acceleration on 6 devices.
PC redemption: Leigod Accelerator - More in the upper right corner - CDK/code redemption - Enter miaoer for redemption during code redemption.

Installation Conditions#

The Leigod accelerator supports any device using Asus, Xiaomi, and OpenWrt with common architectures, not just the devices supported in the official app; everyone can give it a try.

Routers must have SSH access enabled correctly to function properly! Then enter SSH to control the router terminal, and enter the commands one by one or copy and paste them all at once to execute.

Additionally, I do not recommend this command for OpenWrt users without any experience. It is only recommended for Xiaomi/Asus users.

cd /tmp

sh -c "$(curl -fsSL http://119.3.40.126/router_plugin/plugin_install.sh)"

Then go to the app to bind the device. If you installed it successfully, the app will not prompt you to log in with an account password for SSH installation; it can directly recognize and accelerate the game.

Xiaomi#

Taking Xiaomi as an example, you can refer to the official website to obtain the development version.

Generally speaking, flashing the development version grants SSH access. If you do not have it, it is quite normal because the firmware for Xiaomi routers has always been poor...

You can search for your model, such as Xiaomi xx router unlock SSH (e.g., Redmi ax6000 unlock SSH).
Or flash the OpenWrt system and install it through the Leigod manager.

I won't elaborate on how to flash the firmware here, as there are many posts about it. You can find videos on Bilibili or look for posts on the Enshan forum.

Asus#

Asus routers need to flash: official modified firmware, Merlin firmware.

The method to change firmware is in the ##More section at the bottom 👇 titled "Changing Asus Router Firmware to Merlin or Official Modified Firmware."

Use the so-called "software center" version of the firmware, and then try the following tutorial to enable SSH access.

Alternatively, search for shell in the "software center" to install a webshell-like function; the account password is the same as your router's backend, and it must match to use.

OpenWrt#

Recommendations#

If you need a method to unlock SSH for the Redmi AX6000, you can try completing the tutorial below up to ## Unlock SSH. After unlocking SSH, you can use the Leigod plugin normally without flashing U-Boot 👇

Currently, the v24.9 version of CatWrt perfectly supports the Leigod plugin. The compatibility of older versions and third-party OpenWrt is similar. If you want to give it a try, you can check it out 👇

⁴

Frequently Asked Questions#

Applicable to all devices with the Leigod plugin.

Cannot Connect/Device Not Recognized#

You need to ensure that your phone's Wi-Fi is connected to the router that has the Leigod plugin installed in that local area network.

If there is a secondary router or a need for a soft router, it is recommended to set the secondary router to AP mode (wired bridge, wired relay mode). It needs to be in the same local area network as the router with the plugin installed and only have one UPnP service to ensure that the router with the plugin can be recognized via UPnP.

Typical home network topology: Optical modem - Router (with plugin installed) - Phone (host)

Typical home group network topology: Optical modem - Router (with plugin installed) - Router (AP mode) - Phone (host)

Soft router network topology: Optical modem - Soft router (with plugin installed) - Router (AP mode) - Phone (host)

Note: Not considering APMESH, needs to be in the same local area network; I cannot reproduce this.

The prerequisite for logging in here is whether you have installed the router plugin.

If you have installed it, it may be due to router or accelerator issues causing the acceleration component to fail, and you need to reinstall the plugin to diagnose the error.
If you have not installed it, please enter the corresponding SSH account and password, which varies by device and is consistent with the previous SSH acquisition method. If you do not have SSH access, you cannot continue the installation.

No Acceleration Effect#

If the installation is successful but there is no acceleration effect, you can join the group 547205160 and contact the administrator with the Leigod avatar after entering, clearly stating the device and game you are using, or ask group members about compatibility.

If you are using an OpenWrt device, please install it once through the manager, then determine whether it can be used and provide feedback.

⚠️⚠️⚠️ Do not add me, consistent with the previous declaration.

Cannot Find Plugin & Uninstall#

When using the official script for installation, Xiaomi and Asus do not support displaying the plugin control panel. Normally, after a successful installation, the app should recognize the router.

If you need to uninstall, please reset the router or manually uninstall according to the official script installation command.

Common OpenWrt Issues#

What is cattools? Cattools is a powerful toolbox based on CatWrt, generally serving as an application software source in the Leigod manager to obtain complete plugin necessary operations. Other third-party firmware does not require this step; if not, there are no dependencies.

出现 [INFO] 缺少组件包: kmod-netem or other components; this indicates that your firmware currently lacks this dependency, which may affect the user experience but may still function normally.

Cannot Discover Device; the Leigod plugin's device discovery relies on UPnP. If the official version cannot be installed or lacks the UPnP plugin, the Leigod plugin cannot be used correctly.

For other OpenWrt issues, refer to the manager blog... I will not elaborate further here...

Open Source Code#

I have submitted the source code for the Leigod plugin in the LEDE repository (excluding the closed-source accelerator binary program) for experienced geek players to compile and integrate into OpenWrt firmware.

Additionally, this version is a Pre preview version, and some plugin features (such as automatic pause) are still incomplete. To avoid issues with the Pre preview version, we cannot be responsible for the firmware compiled and built by kwrt openwrtai!

More#

Below is the content from the official staff's blog for reference:

This article is synchronized and updated to xLog by Mix Space. The original link is https://www.miaoer.net/posts/blog/leigod-acc-router-plugin